Kolbenring India�s Green initiative which has been aptly named The Kreen Revolution.
Kolbenring's india is committed to any envirionment friendly intiative and it is our endavour to educate and demonstrate to all our clients and potential clients the advantages of using the best sealing solution for every application. Kolbenring's commitment includes designing and manufacturing custom Piston Rings that reduce the carbon footprint of an application. Proper sealing can help decrease the amount of leakage in an application. The leakage that is reduced can be substances that are harmful to the environment such as Fuel or Gases from an engine. Greater sealing performance lessens the carbon footprint via greater efficiency and contributes to a healthier, safer environment.
Contact us for more information regarding our commitment towards creating custom Piston Rings that lead to a healthier environment.
+ Cross Section Configuration
There are many Cross Section Configurations in Piston Rings. depending on the application. some of the common Cross Section Configurations are as under.
|Half keystone ring|
|Scraper ring (stepped)|
|Napier ring (undercut stepped)|
|Slotted oil-control ring|
|Double-bevelled-edge oil-control ring|
|Bevelled-edge oil-control ring|
|Coil spring loaded slotted oil-control ring|
|Coil spring loaded double-bevelled-edge oil-control ring|
|Coil spring loaded bevelled-edge oil-control ring|
|Steel oil-control ring with V-groove|
|Expander / segment oil-control ring|
+ Peripheral Surface Configuration
Some of the commonly used on Peripheral Surface Configurations are as under.
|Peripheral surface straight faced|
|Peripheral surface barrel faced|
|Peripheral surface asymmetrical barrel faced|
|Peripheral surface taper faced|
|Peripheral surface taper faced partially cylindrical machined or lapped|
Some of the commonly used Edge Configurations are as under.
|Internal bevel top side (positive twist type)|
|Internal step top side (positive twist type)|
|Internal bevel bottom side (negative twist type)|
|Internal step bottom side (negative twist type)|
|Internal edges chamfered|
|Internal edges rounded|
|Outside edges chamfered|
|Outside edges rounded|
+ Surface Layer Configuration
The more common Coated, Plated, Nitrided Configurations are as under.
|Peripheral surface plain, i.e., uncoated, unplated and not nitrided|
|Peripheral surface coated or plated "fully-faced configuration"|
|Peripheral surface coated or plated "semi-inlaid configuration"|
|Peripheral surface coated or plated :inlaid configuration"|
|Piston ring nitrided on all surfaces|
|Piston ring nitrided on specific surfaces only (e.g., "peripheral surface only")|